Disabling Red Push on 2002 JVC D-Series AV-XXDX03

Red push is an increase in red saturation that was implemented to maintain more natural looking skin tones while still having a very blue white point. This setting is saved in the service menu in 8 different instances for different combinations of picture mode, color temperature, and input. Instructions to turn it off are below.

Table of Contents

Standard mode for composite, S-Video, and RF

  1. Select Input 1 or 3 or antenna
  2. Use the Video Status button on the remote to select Standard
  3. Enter the service menu by pressing Sleep Timer so that "Sleep Timer 0" is displayed, and then Video Status and Display at the same time.
  4. Press Vol+ to enter the V/C(S) section
  5. Press CH- until you reach S21 NTSC MAT and then press Vol- to set it to zero
  6. Press the Menu button until you are at the Picture Adjust user menu
  7. Toggle the Color Temperature setting
  8. Repeat steps 3-5

Theater Mode for composite, S-Video, and RF

Same as above but select Theater in step 2.

Standard mode for component YPbPr

  1. Select Input 2
  2. Use the Video Status button on the remote to select Standard
  3. Enter the service menu by pressing Sleep Timer so that "Sleep Timer 0" is displayed, and then Video Status and Display at the same time.
  4. Press Vol+ to enter the V/C(S) section
  5. Press CH- until you reach S21 NTSC MAT and then press Vol- to set it to zero
  6. Press the Menu button until you are at the Picture Adjust user menu
  7. Repeat steps 3-5

Theater Mode for component YPbPr

Same as above but select Theater in step 2.