Sony BVM-D24E1WJ
November 16, 2026, 2:08 am
November 16, 2026, 2:23 am
Summary
The Sony BVM-D24E1WJ is the Japanese-market version of Sony's 24-inch multiformat professional broadcast master monitor, introduced in October 1999. It features a flat-face, 22" 16:9 HR Trinitron CRT with 1000 TV lines of horizontal resolution.
It is multiformat, ranging from 240p/480i to 540p/1080i. Also unofficially supports 720p/1440i. Has built in analog RGB and component video inputs and four rear input expansion slots.
The monitor is compatible with Sony BKM-10R and BKM-11R control units and supports the BKM-34H control unit attachment kit.
Manuals
Notes
Sony introduced the BVM-D24E1WJ in October 1999 with an original Japanese domestic list price of 1,850,000 yen, equivalent to approximately $17,459 USD using the October 1999 exchange rate.
Unused loop-through outputs should be manually terminated with 75 ohm terminators
BKM-42HD NOCTUA COOLING FAN MODIFICATION
The BKM-42HD input adapter originally had an Evercool EC4010M05CA cooling fan installed, rated at 5V and 0.12A (or a similar Sony branded fan).
This fan was replaced with a Noctua NF-A4x10 5V, a 40 x 40 x 10 mm cooling fan, to significantly reduce operating noise. The Noctua operates from the BKM-42HD's existing 5V fan supply and produces noticeably less audible noise than the previously installed fan.
Following installation, the adapter continued displaying a persistent "BKM42HD: FAN ERROR" message despite the replacement fan spinning normally. The error appeared when selecting the affected BKM-42HD input and could not be cleared through normal menu operation or repeated power cycles.
Investigation of the BKM-42HD circuit diagram identified the cooling fan connector CN11:
Pin 1 - +5V supply Pin 2 - Ground Pin 3 - FAN feedback signal
The FAN feedback line connects to the adapter's MB89613R-236 microcontroller through its fan detection circuitry.
The Noctua fan's tachometer signal did not satisfy the original Sony fan detection circuit.
The modification was completed by connecting the Sony FAN feedback input to ground while retaining normal 5V power and ground connections to the Noctua fan. This cleared the persistent FAN ERROR message, and the fan continued operating normally.
his modification bypasses the original fan failure detection function. The adapter will no longer automatically report a stopped or failed fan through the original feedback mechanism. Fan operation and airflow must therefore be checked manually.
COLD STARTUP DIAGNOSTICS
During testing, an intermittent startup issue may be observed when all three optional input adapters were installed simultaneously.
After an extended period powered off, the monitor could enter a protection state with the OVER LOAD indicator illuminated solid orange while the POWER and STANDBY indicators blinked together at approximately one-second intervals.
Individual adapters operated correctly, and every tested two-adapter combination started successfully.
The issue was reproducible primarily with the BKM-42HD, BKM-21D, and BKM-24N installed together during a cold startup. After the monitor had warmed up, restarting with all three adapters installed would succeed. Cleaning and reseating the processor temporarily improved startup behavior, but did not conclusively eliminate the issue.
The behavior was also reproduced using different BC control boards and processor firmware versions 1.04 and 1.06. These observations are documented for the benefit of other D24 owners investigating similar intermittent startup or protection issues. A definitive root cause has not yet been established.
SONY CARRYING HANDLE SAFETY NOTICE
On November 16, 2007, Sony issued a safety notice concerning the carrying handles fitted to several professional broadcast monitors, including the BVM-D24E1WJ. For this model, affected serial number ranges include:
2000001 through 2000691 2100001 through 2100024
This particular monitor, serial number 2000443, falls within the affected production range.
Sony warned that the original handles could deteriorate over time, potentially causing the monitor to fall when lifted or transported.
Sony Technical Bulletin 20-2005-008 identifies two relevant D24 handle assemblies:
Original handle assembly: X-3642-018-3 Polycarbonate construction
Improved replacement assembly: X-3608-706-1 Die-cast aluminum construction
The improved handles can be identified by small recessed circular markings, approximately 3 mm in diameter and 0.8 mm deep. Sony's official Japanese safety notice illustrates two different handle designs with these identification marks.
The handle photographed on this particular monitor features two recessed identification marks matching Figure 2 of Sony's notice, consistent with the improved aluminum handle assembly. Sony also used small green circular stickers or white circular stickers marked "T" near the manufacturer's identification label to identify units that had received the replacement. Owners of affected BVM monitors are encouraged to verify both handle assemblies and inspect their mounting hardware before lifting or transporting the equipment.
REFERENCES
Sony Japan, BVM-D24E1WJ Product Announcement
Sony Japan, Carrying Handle Safety Notice, November 16, 2007
Sony Technical Bulletin 20-2005-008, Handle Assembly
Sony BVM-D20F1U / BVM-D24E1WU Operation and Maintenance Manual
Gallery
| Specifications | |
|---|---|
| Brand: | Sony |
| Manufacturer: | Sony |
| Model: | BVM-D24E1WJ |
| Series: | BVM |
| Viewable Size: | 22" |
| Input Signals: | Analog RGB, Component YPbPr |
| Sync: | CSYNC, Sync on Green, Sync on Luma, Sync over Composite |
| Native Resolutions: | 1080i, 1440i, 240p, 480i, 480p, 576i, 576p, 720p |
| Linecount: | 1000 TVL |
| Horizontal Scan Range: | 15 kHz, 45 kHz |
| Vertical Scan Range: | 48 Hz, 60 Hz |
| Formats: | NTSC, PAL, SECAM, NTSC4.43 |
| Aspect: | 16:9 |
| Expansions: | Input Cards |
| Adjustments: | Digital Convergence, Front Mounted Buttons, OSD Customer Controls, OSD Service Menu |
| Horz. Output Transistor: | 2SK1120 |
| Vertical Output IC: | STV9379 |
| Flyback: | NX-4202, NX-4201 |
| Focus Type: | Dual |
| Tube: | M57LRX21X , Sony HR Trinitron , M57LRX20X |
| Deflection: | 90° |
| Mask: |
Aperture Grille
|
| Pitch: | 0.25 mm |
| Tint: | Dark |
| Yoke: | Y24TXD-M |
| Speakers: | None |
| Remote: | BKM-10R, BKM-11R |
| Chassis: | SSC-G09C-A, SSC-G10F-A, SCC-P31E-A |
| Weight: | 112.4 lbs (51 kg) |
| Dimensions (W/H/D): |
565.5 x 436.8 x 587.3 mm
(22.2 x 17.2 x 23.1") |
| Application: | Professional |
| Cabinet Material: | Metal |
| Launched: | 1999 |
| MSRP: | 17459 USD |
| Country of Manufacture: | Japan |
| Market: | Japan |
| Power Standard: | Universal |
| Mounting: | Carrying Handle, Rackable, Table Surface (Standard) |
| Mods: | Fan |
| Degaussing: | Automatic on Power-on, Manual |
| Tag: | Community Submission, Needs Yoke Info |
