No chassis models using this tube have been cataloged in our database yet.
CR-3 Socket
Pin # | Assignment |
---|---|
1 | Heater (F1) |
2 | Red Pin |
3 | G1 Red Pin |
4 | G2 Red Pin |
5 | G2 Green Pin |
6 | Green Pin |
7 | G1 Green Pin |
8 | Keyed Out |
9 | Focus (G3) |
10 | Keyed Out |
11 | Blue Pin |
12 | G1 Blue Pin |
13 | G2 Blue Pin |
14 | Heater (F2) |
Note: If you only see one assignment for G1 (or G2), it means there is only a single G1 (or G2) grid shared across all cathodes. This is called "common G1" (or "common G2"). In this case, when using a Universal Adapter (UA), you only have to hook up one G1 (or G2) lead on your tester to connect all cathodes' G1 or G2 properly.
B&K 490 / 467 Tester Info
Tester Model | Heater | Socket | G1 Voltage |
---|---|---|---|
B&K 490 / 467 | 6.3V | CR-3 | 50 |
Müter Socket Adapter
Tester Model | Socket |
---|---|
BMR 95 & 2005 | 802 |
Sencore CRT Tester Info
Tester Model | Heater | Socket | Bias | Video |
---|---|---|---|---|
CR-7000 | 6.3V | 2 | 132V | Video 2 |
CR-70 | 6.3V | 2 | 68V | VIDEO |
CR-31 | 6.3V | - | D | N/A |