Pinout

Pin #	Assignment
1	Heater (F1)
2	Red Pin
3	G1 Red Pin
4	G2 Red Pin
5	G2 Green Pin
6	Green Pin
7	G1 Green Pin
11	Blue Pin
12	G1 Blue Pin
13	G2 Blue Pin
14	Heater (F2)

Note: If you only see one assignment or reused pin for G1 (or G2), it means there is only a single G1 (or G2) grid shared across all cathodes. This is called "common G1" (or "common G2"). In this case, when using a Universal Adapter (UA), you only have to hook up one G1 (or G2) lead on your tester to connect all cathodes' G1 or G2 properly.

Müter Socket Adapter

Tester Model	Socket
BMR 95 & 2005	802

Sencore CRT Tester Info

Tester Model	Heater	Socket	Bias	Video
CR-7000	-	2	100V	Video 1
CR-70	-	2	68V	VIDEO
CR-31	-	-	D	N/A