Pinout

Pin #	Assignment
6	Heater (F1)
7	Heater (F2)
9	Blue Pin
10	Green Pin
11	Red Pin
12	G1 Red Pin
12	G1 Green Pin
12	G1 Blue Pin
13	G2 Red Pin
13	G2 Green Pin
13	G2 Blue Pin

Note: If you only see one assignment or reused pin for G1 (or G2), it means there is only a single G1 (or G2) grid shared across all cathodes. This is called "common G1" (or "common G2"). In this case, when using a Universal Adapter (UA), you only have to hook up one G1 (or G2) lead on your tester to connect all cathodes' G1 or G2 properly.

B&K 490 / 467 Tester Info

Tester Model	Heater	Socket	G1 Voltage
B&K 490 / 467	6.3V	CR-37	50

Müter Socket Adapter

Tester Model	Socket
BMR 95 & 2005	846

Sencore CRT Tester Info

Tester Model	Heater	Socket	Bias	Video
CR-7000	6.3V	UA	100V	Video 1
CR-70	6.3V	UA	68V	VIDEO
CR-31	6.3V	-	D	N/A