List of Chassis Models which are compatible with M49KZK17X
This list is automatically updated as more models are added to CRT Database.
CR-70 Socket
WARNING: The Sencore-reported pin assignment of the tube is different than the standardized assignment for socket CR-70! This means either the pinout data for this tube is wrong (wouldn't be the first time), or the manufacturer purposely did not follow the standardized pinout. Since we don't know which pinout is correct, both sets of pinout data are shown here.
The mismatched pin assignments are highlighted. You should consult service data for the chassis using the tube to verify the pinout. If you can verify which pinout is correct please
contact us with the correction.
| Pin # |
Standard Assignment |
Sencore Assignment |
| 5 |
G1 Red Pin |
Heater (F1) |
| 6 |
Green Pin |
Heater (F2) |
| 7 |
G2 Red Pin |
G1 Blue Pin |
| 8 |
Red Pin |
Blue Pin |
| 9 |
Heater (F1) |
Green Pin |
| 10 |
Heater (F2) |
Red Pin |
| 11 |
Blue Pin |
G1 Green Pin |
Note: If you only see one assignment for G1 (or G2), it means there is only a single G1 (or G2) grid shared across all cathodes. This is called "common G1" (or "common G2"). In this case, when using a Universal Adapter (UA), you only have to hook up one G1 (or G2) lead on your tester to connect all cathodes' G1 or G2 properly.
B&K 490 / 467 Tester Info
| Tester Model |
Heater |
Socket |
G1 Voltage |
| B&K 490 / 467 |
6.3V |
CR-70 |
30 |
Sencore CRT Tester Info
| Tester Model |
Heater |
Socket |
Bias |
Video |
| CR-7000 |
6.3V |
UA |
68V |
Video 2 |
| CR-70 |
6.3V |
UA |
52V |
VIDEO |
| CR-31 |
6.3V |
- |
C |
N/A |
This work is licensed under a