Summary
Late model PC monitor from NEC-Mitsubishi, featuring a flat 20" visible Diamondtron tube. It was also sold under the NEC brand as the Multisync FE2111SB. Photos on this page are from the NEC branded version.
This monitor is a lower cost version of the Mitsubishi 2070SB & NEC FE2141SB. It uses the same tube and case design, but has a more modest max scan rate of 115 kHz. It's also missing the second VGA input and built-in USB hub. It can display 1600x1200 at 90 Hz or 1920x1440 at 75 Hz.
Literature
Notes
These monitors often suffer from linearity issues, especially in the top 1/2 inch of the screen. This is not usually noticeable in 3D games but can be distracting for desktop use.
Gallery
| Specifications | |
|---|---|
| Brand: | Mitsubishi |
| Manufacturer: | Mitsubishi |
| Model: | 230SB |
| Series: | Diamond Plus |
| Viewable Size: | 20" |
| Inputs: | VGA |
| Sync: | HV Sync, CSYNC, Sync on Green |
| Native Resolutions: | VGA, SVGA, XGA, SXGA, UXGA, QXGA |
| Linecount: | 1000 TVL |
| Horizontal Scan Range: | 30 kHz, 115 kHz |
| Vertical Scan Range: | 50 Hz, 160 Hz |
| Aspect: | 4:3 |
| Adjustments: | Internal Potentiometers, OSD Customer Controls, OSD Service Menu |
| Tube: | Mitsubishi Diamondtron , M51LVT42X |
| Deflection: | 90° |
| Mask: |
Aperture Grille
|
| Pitch: | .24 mm |
| Tint: | Dark |
| Speakers: | None |
| Weight: | 65.3 lbs (29.6 kg) |
| Application: | Computer Monitor |
| Launched: | 2002 |
| Country of Manufacture: | Japan |
| Mounting: | Desk Stand |
| Degaussing: | Automatic on Power-on, Manual |
This work is licensed under a