Summary

Cute little portable CRT with a carry handle. Comes in two other variants: KV-8AD14 with a white case, and KV-8AD12 (also white) with under-cabinet mounting hardware. Shares the same tube as some Sony PVMs (see below).

Literature

• User Manual
• Service Manual

Notes

• Shares the same A-class CRT as the PVM 8020, 8041/42Q and many others. Click the tube name from the spec list to see more. The yoke is compatible with the PVM-8020 and can be used as a direct swap, although the PCB connector must be replaced.
• No OSD adjustment is possible - all color adjustments are done with knobs on the side and the geometry adjustments are internal potentiometers.
• Horizontal width is controlled by a width coil.
  DO NOT STICK ANYTHING METAL INSIDE A WIDTH COIL FOR ADJUSTMENT. YOU WILL BREAK THE COIL AND, IF THE CRT IS ON, YOUR YOUR SCREWDRIVER WILL BECOME EXTREMELY HOT INSTANTLY. You must use plastic trimmer tools.

S-Video Mod

You can upgrade this chassis with S-Video. Simply connect your Luma signal to the input pin for composite video, connect your ground to the composite input ground, and then connect chroma to the spot shown in the image below (right-click and open in new tab to enlarge)