| Pin # |
Assignment |
| 1 |
Focus (G3/G4) |
| 2 |
Keyed Out |
| 3 |
CV H-Stat (Sony) |
| 4 |
G2 Red Pin |
| 5 |
Red Pin |
| 6 |
Green Pin |
| 7 |
G1 Red Pin |
| 8 |
Heater (F1) |
| 9 |
Heater (F2) |
| 10 |
Blue Pin |
| 11 |
Keyed Out |
CR-40 Datasheet Note: If you only see one assignment for G1 (or G2), it means there is only a single G1 (or G2) grid shared across all cathodes. This is called "common G1" (or "common G2"). In this case, when using a Universal Adapter (UA), you only have to hook up one G1 (or G2) lead on your tester to connect all cathodes' G1 or G2 properly.
This work is licensed under a