Pin # |
Assignment |
1 |
Focus (G3) |
2 |
Keyed Out |
3 |
CV H-Stat (Sony) |
4 |
G2 Red Pin |
5 |
Red Pin |
6 |
Green Pin |
7 |
G1 Red Pin |
8 |
Heater (F1) |
9 |
Heater (F2) |
10 |
Blue Pin |
11 |
Keyed Out |
CR-40 Datasheet Note: If you only see one assignment for G1 (or G2), it means there is only a single G1 (or G2) grid shared across all cathodes. This is called "common G1" (or "common G2"). In this case, when using a Universal Adapter (UA), you only have to hook up one G1 (or G2) lead on your tester to connect all cathodes' G1 or G2 properly.